Tips for painting metal, brick, concrete and gates - Tips + Videos and Photos

Tips for painting metal, brick, concrete and gates - Tips + Videos and Photos Construction of the garage is still half the work, after that the building is brought into a decent look, they make interior and exterior decoration. The range of finishing materials will delight those buyers who are going to do finishing in the garage. Garage painting is carried out in 2 - 4 days, with independent work. This method of finishing does not require large labor and financial investments. You can cope with the task on your own, since special skills in this matter are not required.

When choosing paint and varnish materials, be guided by knowledge of the features of the material from which the garage is built. This is due to the fact that for each material there are established norms for working with it. For example, in a garage built of brick or foam block, the walls are pre-plastered, and only after that the paint is applied.

Simple plastering of the wall will not give the expected result, since it violates the adhesion of the paint to the surface.

Features of painting the garage

  • Tips for painting metal, brick, concrete and gates - Tips + Videos and Photos We choose paint and varnish with resistance to open fire.

    This is due to the fact that the garage is a warehouse where the owners store all kinds of jars and containers with lubricants and fuels.

  • Paint for painting the garage inside is selected with increased resistance to damage, abrasion.
  • Materials for surface painting must be resistant to the absorption of foreign odors, and to chemicals.

Painting a garage made of metal

The peculiarity of painting the surface of a metal garage is that the material without a protective coating begins to rust upon contact with moisture.

When choosing a paint for painting a metal garage, pay attention:

  • The presence of anti-corrosion components in the composition;
  • Resistance to air temperature fluctuations;
  • Resistance to the negative effects of atmospheric precipitation and alkalis contained in them;
  • Short drying period of the coating.

Enamel paints with the necessary characteristics are popular for painting a metal garage. More often buy alkyd and organic silicon-based enamels. It should be noted that paints and varnishes are inferior in quality to paints based on acrylic or water. The versatility of paints makes it possible to use for external and internal work.

Acrylic paints do not contain solvents, which makes the material environmentally friendly.

In addition, they meet fire safety standards. Before applying paint, the surface of the metal garage is degreased, after which it is coated with a primer.

Hint. Buy paint and primer from the same manufacturer, and be sure of the quality of the applied coating, as well as the compatibility of materials.

We paint a garage of concrete, brick and foam block

Polymer paints are suitable for painting brick, concrete or block walls of a garage, which are characterized by a number of advantages, making paintwork materials popular:

  • Tips for painting metal, brick, concrete and gates - Tips + Videos and Photos Epoxy enamel with primer components in the composition is applied immediately after opening the can .


  • PVC paint is characterized by increased resistance to subzero temperatures.
  • The polyurethane dye is produced with excellent resistance to wear and tear and chemicals.
  • Acrylic based water dispersion paints can be applied over freshly plastered walls.

    The material has increased resistance to aggressive environmental influences.

  • Paints based on polymer particles can be used to paint the interior walls of the garage, as well as exterior ones.
  • Nitro enamel paint works great when used outside. Its main advantage is fast drying.

Painting a concrete floor in a garage

Why paint a concrete floor? Many garage owners consider this activity to be irrational, it will still be erased.

Yes, but in this way, you can protect the concrete floor from various negative influences from the outside. The fact is that the porous structure of concrete quickly absorbs moisture. In winter, when frosts hit, the water remaining in the pores will freeze and begin to increase in volume. Due to this, the structure of the concrete is destroyed, cracks are formed, and the floor will eventually become unusable. Painting with paints and varnishes will help prevent this unpleasant process.

To paint a concrete floor in a garage, choose an epoxy or alkyd paint. These materials do not accumulate static eclectic charge, have anti-slip properties, and are resistant to chemicals. Stir thoroughly before painting the floor with epoxy paint. Alkyd paint is delivered to store shelves ready-made, so it can be used immediately after opening the can.


Before applying alkyd paint to the surface, the floor must be covered with a primer. By comparison, this does not apply to epoxy paints.

Any surfaces are cleaned of dust, dirt, oil stains before painting. If necessary, chips and cracks should be repaired with cement mortar or putty. Only after carrying out all these manipulations can you proceed to staining.

Apply paint in 2 - 4 layers. The floor temperature in the garage is at least + 5ºC, the air temperature is at least + 10ºC, and the room humidity is at the level of 80%. You should start painting the concrete base after 5 days. During this time, the concrete will set. Each coat of paint for painting the concrete floor in the garage is left to dry, then proceed to apply a new coat.

On average, one coat of paint dries per day.

When choosing a paint and varnish material for the floor, pay attention to the performance characteristics of the composition. Given the increased stress, floor paint is tested for wear, temperature fluctuations and aggressive substances that are likely to spill onto the floor.

Painting the walls in the garage. Process

Preparation of walls

For painting plastered walls in the garage, silicate paints are used, the production of which is based on potash glass.

The material has a number of advantages over other paintwork materials:

  • Resistance to burnout under the influence of ultraviolet radiation;
  • Resistance to wear;
  • Durability of the coating.
  • Suitable for painting concrete, brick and plastered walls.

In addition to silicate paints, polysilicon materials are popular, which are suitable for painting plastered walls, have a high level of adhesion to organic plaster. It should be noted that this paint is completely vapor permeable, and this allows the walls to breathe. The disadvantages include the high cost of paint.

Painting walls in the garage with water-based paints do not lose their positions, and are considered the most frequently purchased paintwork materials. They are based on components of organic and acrylic resins. The painted surface has the ability to repel various impurities, does not attract statically charged dust particles. The only drawbacks are the walls made of silicate blocks and covered with lime.

What paint to choose for painting garage doors?

The approach to painting metal garage doors has some peculiarities.

Metal products quickly rust when exposed to water, without a protective coating. In addition, painted doors look attractive, and the choice of shades will delight buyers.

Hint. When choosing paint for garage doors, pay attention to one that is endowed with a high level of adhesion to metal surfaces, moisture resistance.

The composition of paints for metal should not contain chemicals that come into contact with steel, triggering oxidizing reactions.

Otherwise, a hood filled with air will form on the surface of the product, after which the coating will begin to peel off. Also, paintwork materials must be resistant to fluctuations in temperature conditions, often garage premises are not equipped with a heating system.

Before starting the staining process, prepare the necessary tools, it is convenient to keep everything at hand.

Materials and tools

  • Tips for painting metal, brick, concrete and gates - Tips + Videos and Photos Paint for metal products.
  • Thinner.

  • Liquid soap.
  • Priming compound.
  • Stepladder.
  • Garden hose.
  • Brush, roller or spray for applying paint of the artist's choice.

The choice of coating color is entirely up to the preferences of the garage owner. Non-staining, muted shades are popular.It is desirable that the paint is easily washed off from dirt.

( 1 grade, average 5 of 5 )