Any skilled craftsman cannot do without a special tool. And such a specialist as an electrician is no exception. An electrician is the person who monitors the health of devices and electrical networks, and also an electrician conducts electrical wiring. In order to carry out the work efficiently, the electrician needs special tools. Next, we will consider what tool is needed for an electrician to work.
Further in the text we will also tell you how and why to use the tool for an electrician.
Next, consider the list of tools that an electrician will need to service and repair electrical equipment:
For working in chains under voltage use dielectric rubber gloves .
Gloves should be carefully inspected for cracks, punctures and cuts before using them.
These gloves are sold in specialized stores.
After purchasing gloves, you need to check their durability and quality. To do this, they are filled with air and squeezed by hands; air leakage is impossible in high-quality gloves.
Very often the electrician uses screwdrivers for work of different types.
Screwdrivers are needed to tighten the terminal blocks, tighten self-tapping screws, bolts and to dismantle old equipment.
For the job it is best to use long insulated flat and Phillips screwdrivers of various sizes.
The screwdriver is suitable for many jobs. This tool will help you make holes in the walls of junction boxes or shield.
If a screwdriver is too expensive, use a cordless screwdriver instead.
It is best to buy a set with all attachments, because during electrical installation it often happens that access to the necessary places is difficult.
Using pliers tighten small nuts and bite the wires.
Pliers must have one piece, insulated handles.
In addition to pliers, round-nose pliers may be needed in the work.
To evenly bite, wires are needed, such a tool like a side cutter or simply nippers.
Due to the fact that the tool has a special sharpening of the cutting part, they cut off the wire without compressing its ends.
Experienced electricians get by with wire cutters only, not using pliers.
To connect multiple wires in bundles, ties of different sizes are often used.
These ties help secure the wires.
To select the required size of the tie, it is necessary to take into account the cross-section of the wires and their number.
To find out the diameter of the wire (core), use a vernier caliper, this method is relevant in the absence of cable marking.
If you do not have this device, then you can use a regular ruler.
Different wires are used to clean the wires tools.
For example, wiring knives or tools to strip insulation.
As a rule, knives are used by specialists who already have experience.
To connect wires often use screw terminals .
Recently, sleeves have replaced the terminal blocks, which are used to connect or crimp the ends of wires.
Crimping pliers are used to connect the sleeves.
Tinning is used to protect the ends of the wire an alloy of tin and lead.
Due to this procedure, the cores of the wires become one whole.
Soldering irons of different power are used for wire tinning.
It is rather difficult to process wires with a large cross-section with a soldering iron, for they use a soldering bath, it is not sold in many stores, because it belongs to specialized tools.
Therefore, soldering pots are used only by experienced specialists or large organizations.
In addition to the tools that are often used, there are other tools, namely various indicators and measuring instruments.
We will consider the more used
These screwdrivers are used to check the presence of voltage in the network and to determine the phase conductor.
Every electrician must have this tool.
The principle of operation of this tool is quite simple: when you touch the phase wire, the indicator lights up, and when you touch the neutral wire, the indicator does not light up.
To determine the mains voltage, use the INN indicator -1.
The device has two probes, one of them has a signal lamp.
The probes are interconnected by a wire.
The multimeter is a more reliable instrument for measuring in electrical networks.
At the moment they use digital multimeters, so they measure voltage, current, resistance of a circuit.
An inexpensive model is suitable for a beginner electrician, and a model with advanced functionality is suitable for experienced specialists.
Sometimes electricians use analog multimeters for their work.
Next, let's talk about the tools that electricians may also need.
Drill with nozzles and drills
You may need such a tool for work like a drill with different drills and attachments.
You may also need a puncher, it is necessary for chipping, cutting holes for sockets, junction boxes and switches.
Set of crowns
Also, for work you will need a set of crowns with different diameter.
They are needed to cut holes for switches and sockets.
And so in this article we have announced what set of tools is needed for an electrician. If the work is more complex, then more specific tools may be needed.
It is very important when carrying out work, to observe safety precautions, to wear dielectric gloves and safety glasses before work.
Well, so we told you about the tools that an electrician will need to work. Good luck!
( 4 marks, average 4 of 5 )
Posted By: Work Style |12, Nov 2020
Posted By: Work Style |13, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |08, Nov 2020
Posted By: Work Style |10, Nov 2020