Types and firms manufacturers + Video

Types and firms manufacturers + Video Finishing the terrace is not as difficult as you might think. Your main task will be the right choice of material that will ensure the strength of the structure and the long service life of your structure.

The modern building materials market is able to satisfy the requirements of almost every buyer, offering a choice of materials of different types and sizes of decking. Each of them has its own operating characteristics, technical characteristics and applications.

The choice of the buyer depends on them, because for different purposes there is a specific product.

Types of decking boards

The classification of decking boards implies division into 3 types:

  • From solid natural wood.
  • From lumber.
  • Made of wood-polymer composite.

Terrace board made of natural solid wood

For the production of this material, rare species of trees are used that grow in our country, and are also common in countries Asia, Africa and South America. Wooden decking is notable for its high cost, but this is fully justified by its long service life, which often exceeds eighty years.

This material has such features as:

  • High level of resistance to moisture. The massrandub mahogany decking has a density of such a level that it can withstand heavy loads. In addition, the risk of mold and mildew formation on the material is completely eliminated due to the high content of rubber-type resins.
  • Australian walnut is very often used in the production of decking for outdoor structures.
  • After the installation work, the decking does not need to be processed.

    In addition, there is no need for costly constant maintenance.

Timber decking

Types and firms manufacturers + Video In the production of decking of this type, two methods of material processing are used: thermal method, and saturation with special substances in order to protect against the influence of negative factors. The second method is called impregnation. Wood processing does not in any way cause loss of quality and appearance. These methods only contribute to the formation of excellent technical characteristics, increases the ability to resist the spread of moldy processes and the formation of fungus.

The service life of such a material is approximately 20 years.

Note. It is impossible to carry out work on planing the decking, this will lead to the destruction of the protective coating.

The thermal method for the production of decking consists in exposing the material to a temperature of 200 ° C, this allows you to completely change the operational characteristics. The material becomes lighter in weight, the ability to absorb moisture decreases.

As a result of processing, the board acquires a wonderful hue of honey.It is worth noting that the material has a low density, so the installation of decking is best carried out on objects with a presumably low load.

Terrace board made of wood-polymer composite

The name speaks about the features of the material, from which we understand that the material is made of wood and special polymers. This material is characterized very positively due to its high performance. First of all, it should be noted that the composite decking does not rot, which allows it to perfectly withstand increased loads.

Some people may not like the look of the board due to the fact that it is rather unnatural. Also, there is a tendency to change shape over time.

Types of composite: polished and not polished. The technical features of these materials are almost the same, with the only difference that sanding the board prevents slipping on the terrace. That is, in theory, the surface should acquire a certain roughness and dullness.

Most decking decking manufacturers say this, but in fact, sanding makes it possible to smooth out production defects, making them less noticeable.

Grinding of a composite decking board also has a negative reverse side, namely: the polymer coating of the material is destroyed, which leads to the fact that the board begins to deteriorate under the influence of negative environmental factors. Dirt constantly forms on the terrace, which is difficult to remove, and the surface becomes untidy in appearance.

Let's try to consider in detail the features of the operation of a wood-composite decking board, detailing the technical features.

The cooperation of polymer components and wood acquires the character of perfection due to the influence of special modifiers.

Polymers of thermoplastic type enhance the functionality of the wood material:

  • Types and firms manufacturers + Video The ability to retain the original color.
  • Resists the destructive influence of the external environment (rain, snow, wind).
  • Insects are oblivious to the plank of this species.
  • Environmentally friendly. Lead and formaldehyde are not used in the production of the board.

  • The term of operation is 30 years.
  • Anti-slip coating.
  • No need for additional processing after installation.
  • Thermal stability within the range - 60 ° С + 80 ° С.
  • Ease of processing and installation.

  • During installation work, the board may bend to the required shape. Therefore, this material is the best suited for the formation of a terrace on a relief terrain. You can also easily create ledges, steps, corners, and more.
  • Resistant to cracks, scratches, stains and other imperfections.

Terrace board.

Standard sizes

  • Material thickness - 22 - 28 mm;
  • Width - 135 - 147 mm;
  • Length - 1.5 m - 6 m ...

Technical features:

  • Density - 1.

    2 g / cm³.

  • Moisture absorption at 5%.
  • The wear rate is not more than 0.1 g / cm².
  • Flammability class - G4.

  • Weight of 1 m board - no more than 2.6 kg.

Due to the fact that the material for finishing terraces has fixed dimensions, it is suitable for working with almost any object. The most that neither is the standard, determines the dimensions of the decking at the level: width - 140 mm, thickness - 28 mm, length - 4 m. If you need a specific size, you can make an order in production.

The thickness of the larch decking is 20 mm. Expensive specimens can be no more than 45 mm thick. If necessary, you can use a wide board - about 19 cm, or a narrow one - 11.5 cm.

Sorts of decking made of natural wood have the following dimensions:

  • Length 1.

    5 m - 6 m. This material is often used for arranging dance floors, piers and piers. The 60 cm board is made of teak, merabou and rosewood.

  • The thickness of the decking board is 4 - 24 cm (larch, cedar), 20 - 25 mm (exotic wood species).
  • Width - 14 cm - 16 cm.

Note. The thickness of the material determines the level of strength of the board. Accordingly, the greater the thickness and width of the material, the greater the load can be exerted on it.

The cost of decking directly depends on the size of the material. The sale of material is carried out in linear meters and square meters.

In addition, the appearance and quality of the board affects the final cost. Natural wood boards, of course, will cost more. And even in this category there will be differences depending on the type of wood.

Production of decking

The building materials market is oversaturated with offers from various manufacturers. Sometimes it can be very difficult to decide.

One of the most famous manufacturers of the best decking boards is "Terrapol".

The material is mainly used for laying the floor of outdoor objects: swimming pools, sports grounds, marinas, piers. It has a high level of moisture resistance. Wood polymer-composite terrace "Terrapol" board has excellent performance and attractive appearance.

The following manufacturers have gained fame in Russia: "Ital Parchetti", "WOOZEN", "TREX", "HOLZDORF", "JUNGLWOOD", "EKODEK".

.