Decking - dimensions sheet, varieties and photos
Profiled sheeting is a popular material for roofing, which is a galvanized and corrugated sheet, on top of which a special polymer coating is applied.
Depending on the dimensions, manufacturer and weight, the types of coverings and other parameters may differ, which will ultimately determine the type of profiled flooring.
Given the wide variety of products on the construction market, buyers ask themselves - what kind of profiled flooring is required for cladding a house? What are the overall dimensions of the corrugated sheet and other characteristics? We will provide all markings and other answers to questions in an article that will be of practical use.
Learn about the main parameters of such a building material is very simple. It is required to consider the inscriptions that are made on each sheet - they are the same for all manufacturers and are standardized under Russian GOST 24045-94.
According to GOSTs, there are different types of profiled flooring:
Due to their strength and rigidity, profiled sheets with the "H" marking can withstand enormous loads.
The material has found incredibly widespread use - it is used for working on the wall, and for creating various structures (hangars, garages), and for building fences and other fences. Profiled flooring "C" is characterized by high shock absorption resistance and strength.
Please note that despite the different types of markings, it is permissible to use profiled sheets for other purposes.
For example, profiled sheets "C" can also be used in roofing works, however, here you need to make a roof with a large slope, and the lathing for profiled flooring should be very dense, if not solid. The same will apply to roofing sheets - they can be used to mount a fence, but additional transverse-type beams must be installed. To avoid such technological complications of the construction process, it is recommended to use it only for its intended purpose.
Quite often, different brands of profiled flooring have similar characteristics, because of which it will be necessary to choose the material only at the cost and appearance of the corrugated board.
We have considered the most popular brands of profiled flooring. Based on the scope of use, it is required to determine the specific parameters of the sheets.
So, based on the characteristics, you can use a profiled sheet for the construction of a wicket. A wicket door made and decorated with profiled flooring will fit perfectly into the surrounding landscape. After the wicket is installed, you need to make a lock.
It can be very different for a wicket made of profiled decking.
The dimensions are required in order to determine the amount of material for installation work. In addition, you also need to know about the weight of the profiled sheets - so you can calculate the ultimate load and determine the type of battens that should be used for the installation work of the profiled flooring.
Length and width of sheets
There are numerous types of corrugated board, and it is required to consider the standard dimensions of the sheet of the most popular types:
75 meters, H60 - 0.845 meters, and H75 - 0.75 meters.
9-1 meters, C18, C21 and C44 - 1 meter.
Please note that in order to determine the length of the profiled sheet, you need to look at the last digits in the product marking. The length of such a sheet can be 2.5 meters, and 11 meters, even more.
The wave height will directly depend on the type of profiled sheet.
So, roofing and bearing sheets have a large corrugation, the height of which will be from 3.5 to 4.4 cm. Sheets for walls, which are used for finishing work, can be from 1.3 cm in width and more.
Naturally, the height of the wave of each new type will be greater by 0.3-0. 35 cm.
Sheet thickness and wave height
The parameters are as follows:
09 cm. Accordingly, the weight of each square meter of the profiled sheet will range from 7.4 to 11 kg.
08 cm. Weight varies from 6.2 to 9. 5 kg.
055 to 0.07 cm, and the weight varies from 5.4 to 7.5 kg.
As you can see, it's pretty easy to figure out the parameters.
After all the above characteristics, the reader is able to determine what kind of material will ideally suit one or the other types of installation work. It is also required to take into account that all the given types, dimensions were drawn up according to the current GOSTs. When buying foreign profiled sheets that do not have GOST certificates, there may be a deviation from the characteristics listed above.
Posted By: Work Style |12, Nov 2020
Posted By: Work Style |10, Nov 2020
Posted By: Work Style |04, Nov 2020
Posted By: Work Style |04, Nov 2020
Posted By: Work Style |13, Nov 2020