Izorok insulation: reviews, characteristics. High indicators of energy efficiency of buildings against the background of a constant rise in prices and significant savings in energy resources are a need in our time. There are a huge number of methods for this, and one of them is insulation. The choice of material that can be called high-quality plays an important role in this case. Thanks to new production lines, it has become possible to obtain high quality materials that are used to insulate building and enclosing structures.
This article will focus on the Izoroke insulation and reviews about it.
All products manufactured under the Izorok brand were noted only in a positive way, since they meet all world quality requirements and have become a leader in thermal insulation materials. The excellent performance properties of this insulation, combined with a reasonable price, have made it popular in the construction of new buildings and the renovation of old ones, which helps to improve energy efficiency.
Many types of material have been created for the Izorok range of heaters, but all have certain characteristic features.
With a large number of air pores in mineral slabs, it is possible to accumulate and store heat in the building wall, which helps to reduce energy costs.
This characteristic has become possible due to the fact that the material contains special hydrophobic additives that help prevent the penetration of moisture into the material, which in turn also increases the heat-insulating properties of mineral plates.
The use of mineral wool-based insulation of this brand will be your guarantee of providing ideal living conditions in any room that you will insulate with these plates.
All varieties of Izoroca are durable and retain their performance well even after the warranty period expires, which became the best recommendation for both large developers and individuals who have set themselves the goal of reliability and quality insulation for your home.
In the Izoroka product line, all types of insulation differ from each other and include plates for sound insulation and thermal insulation, have vapor and waterproof membranes, there are and stitched mineral wool mats. Insulation Izorok has a wide range of applications and can be used for the construction of various structures, buildings and structures of the housing stock and industrial, as well as used for repair work and reconstruction. This list includes both temporary structures and those structures that are planned to be used for long-term use.
Depending on the selected density of the material, it can be used for:
Industrial-type products are used for:
Each type of work has its own brands of insulation Izorok, reviews of which are mostly positive, since people select exactly what is required for their needs (those brands of insulation that, by their characteristics and properties are best). In order to accurately determine the choice, you should know the purpose of this or that brand.
So it will be easier for you to choose exactly the material that will guarantee the quality of work.
there is no cement-sand screed. Recommended for use in single coatings. Usually, in this case, two types of this insulation are used - the upper layer is made of Isoruf B, and the lower one is made of Isoruf N. Such varieties can be used as an insulating layer in sandwich panels that have a metal sheath.
These are special mats with a high density, which are used in construction work as an intermediate layer in reinforced concrete structures, as well as for creating thermal insulation and sound insulation of floor ceilings. The same material is used to create a floor when performing a wet screed or self-leveling floors. Isoflor can also be an element of sandwich panels with a metal sheath.
This option will also be no less suitable when insulating a building using the technology of hinged ventilated facades.
Plastering is carried out using a steel reinforcing mesh.
Please note that the most popular among private construction is Izoroc 50 with a density of 50 kg / m 3 and Izoroc 75 with a density of 75 kg / m 3 respectively. On average, you will have to pay 400 rubles for a package. The material is suitable for both outdoor and indoor use.
The products are presented in the form of stitched mats and heat-insulating cylinders
Such heat-insulating foil cylinders and half-cylinders are designed to insulate the process pipeline. Working temperature range from -180 to +400 degrees. The price for such a heater Izorok, reviews of which are only positive, range from 450 to 600 rubles per package.
In order to carry out insulation work with Izorok plates on different types of surfaces, there are rules. For many technologies, it is required to use waterproofing and vapor barrier in order to maintain the quality of the insulation.
To ensure the best performance, you should use ancillary products from the same company.
Before you start laying the insulation, you should first remove the old floor covering, clean the screed from any dirt, patch up all cracks and crevices, level the surface and lay the materials for waterproofing, and then the Izorok mats, which must be positioned end-to-end so that there is not even a minimum gap. After that, laying the waterproofing layer is again required, and on it place a reinforcing mesh, on top of which there will be a cement screed.
If there is a room under the screed where it is humid and warm, for example, a sauna, then an additional vapor barrier is required, which will be located under the sheets of insulation. If the bottom is wet and cold, for example, a cellar, then the vapor barrier should be on top of the insulation.
In wall structures of this type, the slabs were able to prove themselves in the best way. The best quality is considered insulation, made in two layers of material. On the walls, you should install a crate made of wooden slats with a width of 5 cm or from a metal profile. The distance should be the same as the length or width of the insulation. The installation is carried out so that the slabs on the outside overlap the seams of the material on the inside.
The sheet is attached to self-tapping screws at five points. The outer layer of insulation must be protected with a waterproofing and windproof film.
Usually even at the stage of creating the frame the distance between the uprights made of wood is made so that the insulation layer fits, i.e. 0.
6 meters, so in this case there is no need to create a crate, Izorok will fit in 3 layers in ready-made niches and you can not attach it in any way.
Above the vapor barrier film should be fixed, which will be tightly stretched. Although it is customary to argue that the material is environmentally friendly, if particles of mineral wool get on the skin, severe itching begins, which will not last a day. For this reason, we urge you to use personal protective equipment and work only with rubberized gloves.
A layer of waterproofing should be laid on a wooden floor, the boards of which are tightly laid.
Logs should be laid on top of the boards, in the intervals of which the insulation should be placed close. This should be done at random so that there are no gaps and crevices.
The next layer consists of a vapor barrier, as this can prevent moisture penetration from a warm room into a cold layer. This should be done so that the insulation is protected from moisture, because because of this it will lose its original thermal insulation properties. After that, we create a rough floor using plywood logs, OMB or something else of your choice.
A topcoat should be marked on top of this material. It can be laminate or any other type of flooring you want.
With the help of mineral slabs, it is possible to insulate interfloor wooden floors, and for this they are laid between the beams. It is not necessary to place a layer of protective vapor barrier. But if one room is humid, and the second is warm, for example, a kitchen and a bathroom, a vapor barrier is a must.
If the wet room is located on top, an additional waterproofing layer is required.
Still, it is important to know what people who have already dealt with it think about the material. Here are some reviews found on the forums:
Fedor, Voronezh : "We used excellent elastic slabs for the facade of Isovent, although the size is a bit unusual. There were no problems during installation - that's all it was quick and easy. I liked that there is no dust from such plates and the edges do not even crumble after cutting.
For me, this is an indicator that everything will sit perfectly in the crate, and the insulation will not blow out through the gap. "
Alexander, Moscow : "I am an inexperienced builder, so I spent a lot of time studying reviews about different materials. As for the insulation, I could not choose a brand for a long time, so I made a decision. look in the store and immediately feel it. ”I liked Isolight-L from inexpensive series, especially since it didn’t get fluff like from Rocklite.
Petr, Kaluga : "I have already used Izorok more than once, but only this year I had a chance to work with the Ultralight variety. It seems to me that this is the most unfortunate decision of the company, since there is stratification. During installation, the mats disintegrated into bundles of fibers.We had to fix everything already in the process of laying - we threw the slabs onto a substrate made of film and, as if on a stretcher, delivered them to the attic one by one. In principle, it turned out well - I tamped it between the lags, and then carefully pulled out the film.
Posted By: Work Style |12, Nov 2020
Posted By: Work Style |01, Nov 2020
Posted By: Work Style |12, Nov 2020
Posted By: Work Style |12, Nov 2020
Posted By: Work Style |08, Nov 2020