We create a project of a frame house with our own hands: take ready-made

We create a project of a frame house with our own hands: take ready-made Construction of frame structures today is the most profitable, if evaluated by the ratio of the cost of the material used and the work done to the end result.

Building a frame house according to the project with your hands will cost at least a third less than building an analogue of brick.

[contents ]

Meanwhile, the operational characteristics of such a structure are in no way inferior to those of a solid capital dwelling. To build a familiar stone building, you need to have certain building skills, dexterity and experience. Even an inexperienced beginner can handle the erection of a frame structure - there would be a desire.

Start: project, resolution

We create a project of a frame house with our own hands: take ready-made
Example project

There are a huge number of projects of frame panel houses. Their main differences are the size and area of ​​the building, number of storeys, layout, the presence or absence of additional outbuildings.

But the recommended order of construction hardly changes, despite the number of storeys, the size of the potential dwelling and its other features.

According to the existing procedure, before starting the construction of any residential building, the future owners must obtain permission to carry out all the necessary measures, for which they have to contact the appropriate state authorities. Usually these are the administrative bodies of the given locality.

We create a project of a frame house with our own hands: take ready-made Any house needs a plan, or a project. It can be ordered from professionals, in a specialized organization, or you can compose it yourself, with your own hands: the main thing is that it is available. Otherwise, there is a risk of various difficulties, which, most likely, will cause the subsequent rise in the cost of the object.

In open sources, you can find the best frame house project for you to build with your own hands.

Among the variety of solutions presented, it will not be difficult to find the right one for you.

It will become the main reference point for construction.

Frame house project: simple technology

We create a project of a frame house with our own hands: take ready-made What is a frame house? This building is a rigid frame consisting of beams and ceilings. And already panels are attached to them from the outside and from the inside. The wall space is filled with thermal insulation material. As it you can buy mineral wool, expanded polystyrene and other materials that are harmless to health.

The idea of ​​such housing saw the light of day in Canada: when in the post-war years there was an urgent need to provide housing for emigrants from Europe.

The construction of frame houses is carried out on the sandwich principle

We create a project of a frame house with our own hands: take ready-made
Project houses 6 by 6

It is characterized by: low cost of work and materials, excellent construction speed, the ability to carry out the necessary work year-round, that is, in any season.Wood has always been a fairly affordable building material.

The advantage of self-erected houses using frame technology also lies in the fact that they heat up relatively quickly from the inside, which significantly reduces heating costs. Outwardly, such buildings look very attractive, because a variety of available materials can be used for decoration.

Any, the most daring design idea, can be implemented in such a design.

Project of a 6x6 frame house: important when buying material

Many different manufacturers are now selling material for making a frame house with their own hands according to projects and drawings. Unfortunately, not all manufacturers and sellers are responsible. To choose the frame correctly, you need to know some of the nuances.

We create a project of a frame house with our own hands: take ready-made It is hardly necessary to explain that it is always more profitable to interact with a company that has its own production.

The opportunity to order an individual project will also not be superfluous.

The quality of building materials has a special role to play. It is worth paying attention to this.

Some unscrupulous manufacturers are able to sell cheap insulation under the guise of safe insulation, although in fact this material contains phenoformaldehyde resins. Another possible bad buy is a thin and unreliable skeleton.

We create a project of a frame house with our own hands: take ready-made The manufacturer makes a profit from saving material, and the buyer gets a big headache. Refuse to buy a frame with a thickness of less than 4 centimeters: it will not be able to provide the required load. For beams, the optimal dimensions are 10x4 cm.

According to the project of a frame one-story house with their own hands , construction will not cause difficulties if the requirements for the materials used are met. For example, straps must be at least 10x15 cm in size.

Pay attention to timber - it must be impregnated and treated with special antiseptic compounds with protective properties.

Lags for the floor measuring at least 5x15 cm, subfloor (board) flooring at least 2 cm thick - only in this case the house will be protected from drafts and cold. Any selected material for outdoor decoration should also have a thickness of 16 mm. In order for a set of a frame house built by hand to fully meet your expectations, strictly follow the recommendations.

When developing a project of a frame house with your own hands, all sorts of factors must be taken into account.

This is the geographical location of the allotment, climatic conditions, legislative acts, the presence of water and gas connections, the presence or absence of centralized heating, etc.

Project and estimate

We create a project of a frame house with our own hands: take ready-made Is it difficult to calculate how much it costs to build a frame house with your own hands? Any project is usually developed together with an estimate for all materials used.For convenience, the estimate is divided into separate stages of construction.

All drawings have summarizing data: later they are summarized on the plan.

In this manner, a certain order of assembly of building materials is built with their output to a certain estimate.

Thus, it is not difficult to control the miscalculation of materials and analyze estimates, without resorting to the help of specialists, on your own.

3D model

We create a project of a frame house with our own hands: take ready-made Not so long ago, a new design method appeared - this is obtaining a highly detailed 3D model of a dwelling.

This method allows you to control the quality of construction according to the model, and also makes it possible to turn off completed stages of construction, leaving only those in work.

You can selectively control the frame of the lower floor and the rafters, the floor slab and the frame of the next floor .

Special programs have been developed (AutoCad and others) in which you can display on the monitor only the elements necessary for work, hiding unnecessary layers of the model.

Design: norms and rules

We create a project of a frame house with our own hands: take ready-made It is important to take into account all construction and legal rules and regulations when designing. It is also necessary to strictly observe all existing SNiPs related to single-family residential buildings made of wood and their thermal protection.

A well-designed project greatly simplifies the legal burdens when obtaining a permit for the planned construction.

Convenient when the project is supplied with facade diagrams, explications, sections.

All such drawings can be used in the development of the main master plan, as well as when applying for permission If you want to get a mortgage loan in the amount of the cost of a self-made frame house, you need to submit a project to the bank that meets all the necessary requirements.

Projects of frame houses with their own hands: Special advantages of this construction method

Frame buildings are not decreasing in popularity. What are the obvious advantages of this method of construction of residential buildings?

We create a project of a frame house with our own hands: take ready-made
Drawing and dimensions
  • Low market cost of materials - about 5000 rubles per square meter. This also applies to finishing;
  • High speed of work;
  • Low cost of construction manipulations;
  • All types of work are not limited by weather conditions;
  • Use of a lightweight foundation ;
  • Preservation of the landscape;
  • Ability to do without special equipment and heavy equipment;
  • Easy to lay communications.

An undoubted and very important advantage is that even an inexperienced master, guided by descriptions and recommendations, is able to build a frame house according to the project with his own hands, using photo and video descriptions.

( 1 grade, average 5 of 5 )