We create plaster by machine using our own equipment: Overview + Video

We create plaster by machine using our own equipment: Overview + Video After you have completed the construction of the house, the roof and other important work, the application of plaster is considered almost the final stage on the walls and ceiling.

Interior plastering of walls is a mandatory stage of repair. Plastering works are performed in order to level the surface of the walls and ceiling before finishing the walls or ceiling. Plastering on the outside of the building (facade) has a protective function.

[contents ]

However, plastering is not an easy task and until recently, plastering work was done entirely by hand.

Types of plaster

We create plaster by machine using our own equipment: Overview + Video Plaster can be dry or wet.

Dry plaster is the decoration of walls, ceilings with plasterboard sheet. This kind of plaster is only suitable for finishing the interior of the house. Dry plaster is not used to decorate the exterior of buildings or structures, because the cardboard that is part of the gypsum board loses its quality when wet. Plasterboard sheets are also used to build interior partitions.

Wet plaster is a specially prepared mortar , which is applied to the surface by hand or machine with a spatula.

The most modern method is mechanized plastering. It has several advantages over manual plastering. We will analyze the advantages of mechanized plastering below.

Machine method of applying plaster

We create plaster by machine using our own equipment: Overview + Video Thanks to scientists, appeared on the construction market a unique machine for applying plaster by machine, which significantly saves time and effort.

The machine can be used to plaster walls or ceilings in hard-to-reach places.

A person is needed only to control the operation of the machine.

Advantages of machine labor

Applying plaster by machine saves significant time and effort.

  • The works are performed 3-4 times faster and better.
  • The machine does almost everything for a person, it mixes and delivers the solution.

  • Mechanized plastering allows you to evenly distribute the solution over the wall surface, which cannot be said about applying plaster by the hands of a master.

Why does the manual method of plastering give the effect of scales?
Because the master mixes the solution in portions and applies, accordingly, also in portions. Thus, the layer that he applied first dries up, the next one dries up and, after a while, cracks and chips appear at the boundaries of these layers.

The machine controls the ratio of the ingredients of the solution, mixes thoroughly, which allows you to have the same structure of the mixture for application.

This control allows you to have a quality solution that gives a durable surface finish.


Economy

Mechanized application of plaster allows to significantly reduce the consumption of the solution, since when stirring in a mixer, the mixture is enriched with air bubbles, which allows the solution to grow in volume.

We create plaster by machine using our own equipment: Overview + Video Let's give an example to compare the consumption of materials:

  1. hand plaster - 16 kg per 1 m²;
  2. mechanized plaster - 13 kg per 1 m².

The difference is three kilograms per m². Typically, the plaster is applied in three layers, so the savings figure rises to 9 kg. Thus, machine application of plaster has a rather low cost.

Mechanized plaster adheres well to the surface, due to this, it has increased strength and resistance to various loads.

Due to its fast setting, machine plaster does not require additional finishing works and is ready for decorative finishing immediately after drying.

What does the price depend on?

We create plaster by machine using our own equipment: Overview + Video Today's time machine plaster is very popular and if you ask every person
who decided to make mechanized plaster in their premises, it turns out that he is concerned about the process of its implementation and the cost.

The price is influenced by:

  1. manufacturer of building materials.
    It should be noted that the more expensive the materials (special mixture, primer and putty), the cheaper the mechanized plaster will cost you.

    After all, expensive and high-quality materials have less consumption.

  2. object distance.
    The farther away the object, the higher the cost for the delivery of equipment and materials.
  3. application technology.
    Machine plaster applied to lighthouses will cost more than machine plaster aimed at leveling walls.

  4. work experience of the master.
    As usual, novice craftsmen do not take as much money for their work as, for example, those who have a long work experience. Because a master with good experience will do the job better than a beginner.

Whether or not to use the mechanized plastering method is up to you. We strongly recommend trying this method of applying plaster, because you will not lose anything, but only win and save both energy and time.

And if the materials you choose are of high quality and expensive, then less money will be spent.

.

Universal aerosol varnish and features of its use
Universal aerosol varnish and features of its use

Posted By: Work Style |12, Nov 2020

DIY repair features + Video
DIY repair features + Video

Posted By: Work Style |01, Nov 2020

Do it yourself + Video and Photo
Do it yourself + Video and Photo

Posted By: Work Style |01, Nov 2020

An interior that doesn't go out of style
An interior that doesn't go out of style

Posted By: Work Style |05, Nov 2020