It is very convenient for them to mask the joints on the walls and on the ceiling, especially if they have a different structure and are not done very neatly.
Its presence makes the design of the room clearer and more complete.
Often people ask themselves the question: how to competently and accurately decorate a room with a ceiling plinth?
This is especially true for those cases when the owner of the house prefers repairs done with his own hands.
To do this correctly, it is important to strictly follow the existing recommendations and rules for finishing work.
And then the result will please you.
There are no difficulties in attaching the fillet (this is the name of this element): in fact, all types of products are attached to reliable glue.
In order to hang the ceiling plinth, even inexperienced repairmen have no difficulty. They are worried about something completely different: how to cut the ceiling plinth correctly? In fact, almost every room, no matter how intricate it may be, is equipped with corners.
And in these inner corners, the individual elements of the skirting board should be nicely and evenly joined.
And in rooms of a particularly complex configuration, you will have to be smart about the outer corners. Let's try to figure out how to be in each of these situations, and how to cut the desired part using the available tools.
First of all, let's try to decide what fillet can be made of, and what specific material is better to cut.
On sale today you can find products made of polystyrene (polyvinyl chloride), wood, expanded polystyrene and polyurethane.
Perhaps one of the cheapest skirting boards is made of foam, which is a fragile, soft and brittle material.
Even the fingers of the hands can dent them, and they are easy to wrinkle and blemish. It is quite difficult to cut a beautifully and evenly corner at a baseboard based on polyvinyl chloride.
For an inexperienced craftsman, a large amount of purchased material may go to waste for this very reason. Also, this polymer has high electrostatic properties, which explains its ability to collect dust.
It is most convenient to cut such a plinth with a hacksaw or a sharp construction knife.
Products from expanded polystyrene are also inexpensive, although this material is a more durable analogue of traditional foam.
Can also be cut with a sharp tool.
Extruded expanded polystyrene
Skirting boards from extruded polystyrene are slightly more expensive, they are somewhat denser and more difficult to cut. But they crumble and break much less.
Therefore, cutting them is more convenient and easier.
For this purpose, it is convenient to use a hacksaw or a sharp knife.
Polyurethane skirting boards for the ceiling are currently, perhaps , some of the most expensive.
But they justify their cost: moisture resistant, fairly strong and dense, quite elastic.
The skirting board above the stove may deform and even crackle slightly.
They are perfectly cut with a special knife, without forming a crumb.
But these products are very sensitive to temperature changes.
Wooden skirting boards for the ceiling are quite heavy and dense products, solid and durable.
They lend themselves well to processing with a special fine-toothed hacksaw. You can also use a reliable metal blade. So how to cut the ceiling plinth correctly?
Note that every craftsman has the opportunity not to pore over precise cutting and adjustment of corners.
In the hardware store, you can purchase a factory corner piece, into which the prepared edges of the skirting board can be easily inserted.
It is enough to measure the required length of the workpiece and cut it at right angles.
All defects and flaws will be hidden by this special element. But it is not always possible to use such a convenient method, since the standard sizes of such factory corners can differ markedly from the size of the plinth itself.
Such angles will stand out for their disproportion, and it will not look very neat.
But if the design of the room and the size of the blanks allow you to use this method, then you should not neglect it.
For those who have to use one of the methods for trimming the ceiling plinth, the following tips will come in handy.
How do I trim the corner of a ceiling plinth evenly using it?
A miter box is a simple tool used by carpenters. With it, you can cut any workpiece at the desired angle.
It is usually a wooden, metal or plastic tray on which special vertical slots are made for cutting at an angle of 45 ° and 90 °.
There are complicated designs, on which, in addition to the above-mentioned corners, there is also a hole for making a 60-degree cut.
A special miter box is produced for professional work. Its swivel mechanism allows you to fix the cutting blade in relation to the workpiece at any given angle.
The prepared skirting board is applied to the ceiling, the desired length is laid ..
Then this very strip is inserted into the miter box exactly as it will be located on the ceiling. It must be pressed against the far wall of the device. In this position, the plinth is held by the left hand.
The blade of the hacksaw should be in such a position that its angle is 45 degrees, and the handle is as close to the hand as possible.
Trying to avoid pressing the saw, carefully cut the workpiece.
Next, cut off the striker at the baseboard. It is also placed against the far wall of the instrument, holding and pressing, this time with the right hand.
The position of the hacksaw is similar to the previous procedure - its handle approaches the hand at an angle of 45 degrees. The skirting board is trimmed.
Then the finished, already cut strips are joined - the accuracy of fit is checked. It is believed that for better orientation, when making an inner corner, it is better to start cutting from the front of the product. The cuts usually have to be adjusted with a file.
It is most correct to keep more precise dimensions, first start marking the inner corner, and only after that move on to the outer.
Otherwise, it may happen that the entire length of the bar is insufficient.
The plank is applied to the ceiling, basting is made to size. Holding on with the left hand, the ceiling plinth is pressed against the nearest wall, the hacksaw handle is brought closer to the hand. The workpiece is cut off.
The strike plate is pressed against the nearest wall, while holding it with the right hand. The blade of the hacksaw should be at an angle of 45 °, the handle of the tool comes close to the hand of the master.
A piece of the workpiece is cut off, the corner will neatly fit.
This processing of the edge of the parts with wort is good in cases where the angle between the walls is even and straight (90 °).
If its performance leaves much to be desired, then it is worth using a different method.
The method with marking on the ceiling allows you to cut the angle is precise and even. It has one drawback - it is rather inconvenient to hold the plinth plinth in weight during the procedure.
In all other respects, using this method you will be able to mark the angle for cutting even more accurately than others.
When the skirting board is applied to the intended installation location, all dimensional deviations and inaccuracies are noticeable and immediately taken into account.
First you need to take a couple of workpieces, then cut them at right angles. Pushing the edge of the plank against the perpendicular wall, apply one plank. We outline a line on the ceiling along the contour of the plinth.
We remove the first bar, then, in the same way, resting the butt against the wall, we apply the counter bar. In the same way, mark a line along the contour.
The intersection of the two separate lines is the mark at which the workpiece is cut. Each plank is applied to the surface again, on both the point of the future cut is marked. Draw a line from the found point to the other edge of the plinth.
We cut off the skirting boards according to the outlines made earlier, carefully join them, and place them in their place of installation.
This method allows for more accurate processing of inner corners.
If you don't have a miter box , it is not necessary to buy a tool for a single use. You can create a template with similar functions yourself.
For this, the desired cut angles are applied to wood, paper or cardboard.
Then you need to draw a pair of parallel lines, find the center, and then use the protractor to measure the angles of any given value.
This method is especially convenient because, using it, you can postpone an angle of any size, even more than a straight line.
The method of processing a skirting board using a homemade tool is practically no different from working with an original. The bar is pressed against one of the parallels, after which the hacksaw is set at the required angle and cut off.
Remember to check the angle between the walls before cutting the corners of the workpiece! To do this, use a protractor and a corner.
The measurements required for trimming the skirting board to the ceiling should be done in a special way .
To define and mark an inner corner, the length must be measured from the corner itself. To mark the outer corner, it must be taken into account that the plinth will protrude deeper into the room by a distance that is equal to its width.
It is not advisable to fix the plinth strips until their exact location is tried on and the counter plinth is cut off.
Only after perfect convergence in the corner of both strikers can you begin to mount and fasten them. If work is carried out with polyurethane or wooden skirting boards, defects and flaws can be corrected with a nail file or file. To fit a foam product, you should arm yourself with a sharp knife.
If even a small gap remains after finishing the skirting boards, do not rush to get upset - it is easy to seal it with ordinary putty.
Cutting the ceiling plinth precisely and neatly is not that difficult.
But in order to acquire at least a small skill, first try to practice on small blanks.
Posted By: Work Style |11, Nov 2020
Posted By: Work Style |11, Nov 2020
Posted By: Work Style |01, Nov 2020
Posted By: Work Style |11, Nov 2020
Posted By: Work Style |12, Nov 2020