We fix the ceramic bath border: Overview and Views- Dimensions- Installation features: Pros and cons + Video

We fix the ceramic bath border: Overview and Views- Dimensions- Installation features: Pros and cons + Video When renovating a bathroom, it is important to seal the gap between the edge of the bathtub and the wall. This is necessary so that water does not fall behind the bath and does not provoke fungal and mold growth, and it is also a kind of decorative element. To solve this problem, a ceramic bath border serves.

Note: The second professional name for a ceramic border is ceramic hatel.

There are plastic corners, but it is best to use ceramic ones.

Firstly, tiles remain a priority in the design of bathrooms, and plastic against this background will not be entirely appropriate. Secondly, it is also an aesthetic appearance, plastic still makes the overall picture cheaper and its service life is much shorter. In addition, ceramics is a natural material and is often chosen by lovers of everything natural, reliable and of high quality.

General information

Pros and cons

The following advantages of the ceramic corner can be distinguished:

  • We fix the ceramic bath border: Overview and Views- Dimensions- Installation features: Pros and cons + Video Environmentally friendly;
  • High strength;
  • Resistant to temperature fluctuations;
  • Waterproof ;
  • Not susceptible to deformation;
  • Resistant to chemicals.

Of course, as elsewhere, there are also disadvantages here:

  • high price;
  • low resistance to mechanical stress ;
  • not plastic, that is, they are not used when sealing gaps in irregular shaped baths.

Views

The following types are distinguished:

  • Pencil . It is represented by a thin convex cylindrical strip used to close small gaps. The color palette is varied. These borders are also used to frame mirrors or used for zoning space. Available in the following sizes - 20 * 15 cm or 20.

    5 * 15 cm.

  • Angular view is the most common. They are used for sealing gaps between a bathroom and a medium-sized wall. They are represented by ceramic corners with a triangular cross section. They come in sizes 20x5.

    5 and 25x5. 5 cm.

  • Frieze is presented in the form of a wide flat border with a length equal to the width of the tile. Mainly used for bathroom wall decoration. The sizes can be varied.

In addition to the decorative corners themselves, additional end caps will be needed for their device, as well as elements for joining the corners.

Note: Many models of borders are universal, which makes it possible to construct them not only for surface decorative solutions, but also for initial finishing works.

Installation

How to fix ceramic corners? First you need to calculate the required amount of material. This is done using a conventional measuring tape. All sides of the bath are measured, the resulting amount is divided by the length of one curb and the required amount is obtained.

You will also need to purchase a few extra ones in case of spoiled ones.

If you decide to ennoble the bathroom with your own hands, then take care of the necessary tools, namely, you will need:

  1. a hermetic agent with an antifungal additive;
  2. ceramic modules;
  3. tile adhesive;
  4. rubber spatula, serrated or flat.

The curb can be laid in two ways - under the tile and on the tile.

Installation work on the device of the ceramic corner under the tile can be divided into stages:

  • The working surface is cleaned of dust and dirt. Then it is wiped dry and degreased;
  • A sealant is applied with a special device, after which the joint must be leveled with a spatula.

    If the gap is large, polyurethane foam can be used;

  • Prepare the adhesive. The glue should be dense enough and not spread over the spatula;
  • Always start with a corner border, and then longitudinal. When gluing, you should try to fit the modules as carefully as possible. With the help of a damp sponge, it is necessary to remove the glue that has come out, preventing it from drying;
  • Upon completion of laying the curb, the glue is left to dry for about ten hours. Then the entire plinth is moistened with water and again left to dry completely.

    This process is necessary to prevent the appearance of microcracks because the inside of the glue hardens more slowly than from the outside;

  • As soon as the glue dries, you need to coat the seam with a moisture-resistant sealant composition.

Laying over tiles:

  1. The surface of the bathtub and wall tiles is cleaned and degreased;
  2. Liquid nails are applied to the wall;
  3. Press the corner very tightly against the tile until it fully engages with the glue. The excess must be removed;
  4. After drying, the seam must be treated with a trowel.

Results

Today, ceramic corners are considered the best options for sealing joints between a bathroom and a tiled wall. After all, ceramics is a material of excellent hygienic and environmental properties.

It is perhaps the most suitable for use in wet areas.

A decorative bath curb with proper use can last you about fifty years. Naturally, during this time and several times, decide to change the interior of your bath, so you have nothing to worry about at all.

In addition, there is now a huge variety of colors and textures for these ceramics, which will surely satisfy the desire of any buyer.

( 3 marks, average 1 of 5 )

.