We install a plastic floor skirting board: Types, pros and cons and sizes + Video and Installation tips

We install a plastic floor skirting board: Types, pros and cons and sizes + Video and Installation tips The plinth is installed on the border of the wall and the floor. This action completes the entire indoor renovation process. Along with traditional wood or MDF skirting boards, there is a plastic skirting board for the floor.

It has standard dimensions, is easy to attach, is inexpensive, comes in a wood grain texture and has a large number of colors.

What is a floor plinth for?

The main function of a plinth is to differentiate the area of ​​the walls from the area of ​​the floor.

The secondary function helps to visually increase or decrease the area of ​​the room.

Additional functions also include the concealment of unevenness in the processing of the floor covering and the possibility of laying engineering systems in the form of electrical cables and low-voltage wires for electronics.

Types of plastic skirting boards

Polyvinyl chloride skirting boards

Produced in one-piece molding or with a cable channel inside. The last option has three designs;

  1. We install a plastic floor skirting board: Types, pros and cons and sizes + Video and Installation tips the cable channel is hidden under a separate strip,
  2. panel the skirting board consists of two separable parts along the entire length. The lower part has a channel and holes for fastening, and the upper part is a decorative finishing element,
  3. the skirting board consists of a decorative outer part and a separate installation wall strip.

    The wire is laid in the channels of the mounting plate.

Polyurethane skirting board

It is a kind of PVC material. The form is solid. Has a wide range of colors, but the option of material for painting is possible. It is mounted by gluing to the wall surface.

It has high elasticity.

Positive sides of the plastic skirting board

  • The material is light in weight.
  • Long service life.
  • Advanced functionality.
  • The edges have additional soft edges to protect the space behind the skirting board from moisture ingress and accumulation.

  • Easy installation. Availability of auxiliary parts for lengthening and making corners without cuts.
  • We install a plastic floor skirting board: Types, pros and cons and sizes + Video and Installation tips When heated, becomes soft enough for installation around columns.
  • No negative impact on the environment.
  • Used for mounting a simple set of tools and fasteners.

  • Simply cut with a utility knife or metal saw.
  • Made of hydrophobic material.
  • Mold and rot are prevented on PVC skirting boards.
  • A completely damaged fillet is replaced during repair.
  • The appearance is matched to the texture and color of any natural material.

  • Maintenance of the skirting board is easy.

Weaknesses

  • The material is easily deformed.
  • At low temperatures, the material becomes brittle.
  • Fittings have weak fixings. Care must be taken when attaching them to the fillet.

  • The polyurethane skirting board does not include any molded parts.

The main dimensions of the panels

The lamella length has a parameter of 2.5 meters, but an option of 5 meters is possible.

The width of the plank is the part adjacent to the floor from the outer edge to the corner from which the ascent to the wall begins. It varies from 15 mm to 26 mm.

The height is determined from the angle between the floor and the wall to the uppermost point of the plank and is equal to from 40 mm to 70 mm.

From experience! The higher the ceilings, the higher the height of the skirting board should be.

Step-by-step instructions for installing PVC skirting boards

  1. Sketch the perimeter of the rooms where the floor plinth will be installed. The dimensions of the straight sections must be specified.

Attention! In the absence of door frame thresholds, the doorway distance is subtracted from the perimeter.

These numbers are needed to calculate the correct amount of material.

Separately, according to the scheme, the number of fittings is calculated, consisting of external and internal corners, connecting strips and end caps.

For your information! Fittings are sold in pairs. This is convenient because in the event of a breakdown of the fastening of one part, there will be no need to look for a replacement.

  1. Preparing the tool;
  • tape measure,
  • hacksaw for metal,
  • joinery miter box for even cutting ,
  • clerical knife with a blade of at least 18mm in width,
  • puncher, screwdriver,
  • hammer, not more than 200 gr.

    by weight.

  1. The purchase and delivery of the required amount of material and fasteners is in progress.

Attention! For fastening, it is enough to take a dowel nail for 6 X 60 mm. the number should correspond to the number of holes in the fillets or at the rate of 8 pcs. per unit.

  1. We install a plastic floor skirting board: Types, pros and cons and sizes + Video and Installation tips It is better to start installation from the corner with whole strips.
  2. The part is attached tightly to the wall, the angle corresponding to the position is attached to the end.

Attention! The top and bottom edges of the fillet should fit snugly against the floor and wall surfaces in line. Cracks, creases, irregularities should not be.

  1. Along the holes in the plinth, which are located in the wall of the cable duct, mark with a pencil for the holes for fasteners.

  2. Then you need to remove the bar and drill the holes with a hammer drill using a 6 mm diameter drill. in a depth of 60 mm.
  3. The area is being cleaned of dust and debris.
  4. Next, the skirting board is applied, aligned with the holes, and it is fastened with the dowel nails. They are carefully driven in with a hammer.

Important! It is more practical to use fasteners in the form of a ready-made combination of a plastic dowel and a special nail. It is driven entirely into the hole through the delicate baseboard material. The soft ring of the plug prevents the attachment from breaking.

The following parts are attached similarly.

  1. If it is necessary to trim the fillet to size, it is necessary to take into account the size of the fittings that will be used to connect the strips.

    For corners it is 13 mm, and for a straight section 7 mm. The end cap does not require this consideration.

We install a plastic floor skirting board: Types, pros and cons and sizes + Video and Installation tips In case of correct installation of all parts of the floor plinth, the result will delight for more than one year.

The assembly of polyurethane parts has its own characteristics:

  • It is attached to the wall only with adhesives.
  • Along a straight fillet, they are joined joint to joint, the joint is sealed separately with an adhesive or putty before painting.

  • In the corners, the parts are cut in a special way using a miter box, the seams are also closed.
  • Upon completion of installation, if necessary, the surface is painted.
  • In the case of using painted parts, it is necessary to choose a color for touching up the seams.

Instead of a conclusion

In the case of the correct installation of all parts of the floor plinth, the result will delight in its appearance for more than one year.

.