Wear Resistant Rubber Concrete Floor Paint - Instruction + Video

Wear Resistant Rubber Concrete Floor Paint - Instruction + Video Wear-resistant rubber paint for concrete floors. At the moment, more than 3000 varieties of paints and varnishes for various purposes are produced in the world.

Let's find out what characteristics and features of use the rubber paint, which has recently appeared and has already become the favorite of professional builders, has.

Chemical and technological characteristics

This product is an acrylic emulsion made on a water-dispersion basis using acrylate synthetic latex - a material that has an increased elasticity, resistant to aggressive temperatures and extremely low. Hygroscopicity.

In addition to water, the chemical composition of the paint also contains:

  • Wear Resistant Rubber Concrete Floor Paint - Instruction + Video Coalescent - is a special functional type additive that provides increased adhesion of the applied layer to the treatment surface, and in addition, with natural evaporation (up to 96% in 3 hours at a temperature of +26 degrees) creates a protective outer film.
  • Antifungal additive - a chemical compound that is capable of destroying and preventing the growth of mold and disease-causing fungi for a long time.
  • Antifreeze additive - a component that regulates the rate of hardening of the layer and actively resists aggressive temperatures.
  • Coloring additive - paste of different shades, in which there is an inorganic pigment with increased lightfastness.

Performance Specifications

Rubber concrete floor paint has the following specifications:

  1. Wear Resistant Rubber Concrete Floor Paint - Instruction + Video Able to withstand temperature drops from -55 degrees to +50 degrees (some types can withstand from -82 to +80 degrees) .


  2. Insensitive to environmental influences.
  3. Has increased adhesion properties, which helps to ensure high quality adhesion of layers to the processing surface.
  4. After the paint is completely dry, it is non-slip.

  5. Has no stock and is non-toxic, you can perform work without using a respirator.
  6. Has resistance to fire.
  7. Matt (if you plan to use for roofing, semi-matt).
  8. Perfectly tolerates cleaning, even when using a brush, water, alkaline, antiseptic and other detergents.

When everything is completely dry, the surface treated with paint resembles soft rubber, rubber to the touch, and its elasticity is at least 360%.

The advantage of rubber paint for concrete floor in a garage is that the weight-to-volume ratio is 1.1 kg = 1 liter of paint. One layer, which has an average thickness of 50 microns, will cure completely in 12 hours, and will stop sticking after a couple of hours at a room temperature of 25 degrees. The dry residue is up to 50%.The warranty period for the use of the coating is 10 years (if the paint is wear-resistant, then 20 years).

The shelf life of the product in a closed container is up to 3 years, and after opening another six months. Storage conditions for rubber paint for concrete floors are as follows: from -5 degrees to +25. When freezing and cooling (no more than 5 cycles in 1 month at a temperature of -20 degrees), the paint can be thawed, and for this you need to leave it at room temperature for at least a day. Before use, be sure to stir it until the bottom sediment disappears.

Application and peculiarities of interaction with various materials

Despite the name indicated on the container "for the roof", "for metal", "for concrete" all these types of paint have practically the same properties, the only difference is that there are more active pigments in roof paint, and in concrete paint there is more antifreeze and acrylatex, and in metal paint there is more coalescent.

Exceptions are expensive best quality paints, as their warranty period is from 25 to 30 years, as it is considered to be truly resistant to wear and tear. Such a definition as "for outdoor work" is also not a complete description of the intended purpose of the paint, because its practical use is much wider.

It turns out that any rubber paint with a shelf life of 10 years or more is intended for a whole range of works, and among them we single out:

  • Wear Resistant Rubber Concrete Floor Paint - Instruction + Video Basement and facade, this also includes work with concrete, brick, plaster, cement, plastered (without the use of slaked lime) plastered surfaces.
  • Painting roofs and other objects that have a cladding of clay and metal tiles, asbestos-cement slate, corrugated board, galvanized iron, ondulin, tin.
  • Works indoors on painting plastered and plastered walls, drywall, pasted over with non-woven, vinyl and other non-paper-based wallpaper, chipboard and fiberboard.

  • Used to reduce slipping for covering a ramp, in a pool, an inclined surface.

Important! For painting surfaces that are constantly exposed to mechanical influences - treadmills, courts, playgrounds, pedestrian crossings, etc., it is better to use special paints with an extended shelf life - from 20 to 30 years.

The waterproofness of rubber paint has made it an almost indispensable material for home swimming pools.

  • Application on wood surfaces that are constantly exposed to aggressive effects of light and temperature, namely awnings and benches under the sun.

    For interior work, it can only be used for painting the bathroom and toilet.

  • After preparation, it is allowed to paint surfaces that were previously coated with alkyd or oil paints.

Good advice! The prohibition of using the emulsion as a coloring product for furniture and floors is a recommendation from the manufacturer, but experience shows that after proper preparation, the coating begins to withstand application to the floorboards of the outdoor gazebo. Based on this, the use of environmentally friendly and non-toxic paint for the purposes described above is a personal matter for each owner of a private home.

Recommendations :

  1. It is not recommended to use the paint on "breathing" surfaces - furniture, indoor floor, walls, as hydrophobic additives will interfere with exchange air and the outlet of the formed condensate.

  2. Do not use on surfaces that have a layer of hydrated lime whitewash, as the latex base paint will simply roll off the lime.
  3. The paints have a reduced hiding power, and therefore should be applied in 2-3 coats.

Now it’s worth considering how to prepare for rubber coating your concrete floor.

Painting process

Preparation for staining

This step is very important if you are you really want to test the entire margin of safety of the paint, and you cannot ignore it.

Surface Cleaning

Your goal is to achieve the maximum smooth and non-porous cleaned surface.

  1. Using a metal brush, trowel, trowel or sandpaper, thoroughly clean the surface from dust, dirt, moss and traces of old processing. Pay particular attention to traces of slaked lime whitewash, as well as residues of oil-based paint and alkyd paints - these should be cleaned off to the putty or plaster.
  2. Wear Resistant Rubber Concrete Floor Paint - Instruction + Video Grease and oil stains should be rubbed off until they completely disappear. If the grease eats too deeply, then the wall should be moistened with dishwashing liquid for a couple of hours, and from time to time moistened again so that the stains are surely washed off.
  3. Glossy parts of fiberboard, MDF and other structures should be well sanded to a matte sheen.

  4. If there are cracks, it is imperative to fill them up, and when everything is dry, sand them.
  5. Clean all metal surfaces from dirt, traces of old staining and dust using a metal brush, and then sand and degrease with a solvent, for example, white alcohol. If there is gloss, it is advisable to make the surface matte so that the adhesion to the paint is as good as possible.
  6. After all work on cleaning, filling, sanding and sanding have been completed, the surface should be free of dust residues, and then rinsed with an alkaline solution. After half an hour, rinse the surface again, but this time with clean water and let stand until completely dry.

Now you can proceed to the second step, namely, to perform the priming work.


Before starting the process, metal elements should be coated with an anti-corrosion compound, and then insulated or coated with an inhibiting primer. You will also need to use a special primer with anti-corrosion properties like GF-021.

Important! If, after priming, the surface remains glossy, then sand it slightly to a matt shade.

  1. Cement, concrete, asbestos-cement and other surfaces with a porous structure should be coated at least twice with an antiseptic or façade primer with deep penetration.

  2. Coat wooden parts with acrylic silicone primer.
  3. For all other surfaces, a universal latex or acrylic primer is suitable.
  4. If the prepared surfaces will be exposed to regular negative environmental influences (snow, rain, etc.), then an additional hydrophobic soil coating can be used.

Helpful Hint: If you apply a primer in 2 or more coats, first let the first coat dry and then apply the next one.


To paint the concrete floor of the garage with rubber paint, you will need the following tools: a paint brush, rollers made of foam rubber or polyamed type faux fur , spray gun.

Optimal temperature and weather conditions for staining:

  • Air temperature from +5 to +27 degrees.
  • There is no precipitation and bright sun, the relative humidity should be no more than 70%.
  • Do not paint in strong winds that carry dust.

Important! It is possible to dilute the paint with water, but only exclusively for applying the first layer and no more than 1/10 of the total volume.

Process details

  • Apply several thin coats, not one thick one. The interval between applications of each layer should be at least two hours (or better, all 4 hours).
  • Stir the paint regularly to get an even coating on the surface.
  • The paints must be distributed over the entire surface to be painted and get into everything, even the smallest cracks and dents. This is difficult to achieve with rollers, in particular in hard-to-reach places and in corners, so all defects should be painted over with a brush.

  • During breaks when applying layers, do not leave tools in an open space, as the residues from the paintwork will quickly harden, and then it will be extremely difficult to wash them.

Please note, that the painted surfaces can be washed no less than 7 days after the painting has been completed, since during this period the coating will completely harden and get its wear-resistant qualities.


Approximate cost for 1 liter of rubber paint:

  • Domestic paintwork materials from 250 to 500 rubles.
  • paintwork materials of foreign manufacturers from 600 to 1200 rubles.

We hope you find this information about rubber concrete floor paint useful.

( 1 grade, average 5 of 5 )