Wall panels are on a par with the usual finishing materials for interior work, in terms of importance and decorative characteristics.
They have many positive sides, but no less weak sides.
When decorating the premises, panels are used for interior finishing of walls and ceilings in a full cycle.
They have constant dimensions along the length of 2700 mm and 3000 mm. In widths 120 mm, 250 mm and 500 mm.
Thickness 8mm and 12mm. several types of materials are used for their production, PVC, MDF, natural wood, metal.
Manufactured from polyvinyl chloride. Have a pattern on the surface in a wide color range, applied in different ways;
But there are not many options for images.
The material lasts a long time, but its cost is high.
Such panels are used in the decoration of office premises, hallways, bathrooms and kitchens. It is suitable for walls and ceilings.
Fitted parts in the form of corners, connecting panels, decorative skirting boards are produced for PVC panels.
Parts are mounted on the crate using clamps.
The material for the lathing is wooden blocks 20x40 mm in size. They are fixed to the surface to be finished using dowel nails.
In cases of finishing premises with high humidity or temperature extremes, gypsum board profiles made of galvanized metal with a size of 27x26 are used for lathing.
Shaped details ensure the completeness of the decor of the room.
Manufactured by pressing under pressure from wood chips and natural resins.
It turns out not expensive environmentally friendly material. On its surface, a colored film or veneer is applied to match the wood texture. A more durable coating is laminated surfaces. This layer protects the material from moisture and light mechanical damage.
For use in dry rooms only.
Only universal corners are produced from fittings.
Installation measures are identical with the installation of PVC panels.
They are made from an array of coniferous trees, oak, larch. The main lineup consists of lining, block house, panels imitating timber. This material is used to decorate walls, ceilings and floors.
Traditional material is constantly at the forefront of interior decoration. It has a natural structure.
This material has sound insulation, thermal insulation. It is a clean ecological product.
When using special compounds, it is possible to give the wood enhanced properties.
The service life is increased, the texture is more clearly distinguished.
Oil-based paints and varnishes are used for coating.
The panels are mounted on the bars with clamps, directly with nails with an open method of fastening, with self-tapping screws into the groove collar.
Made from thin sheets. The material goes on sale ready-made, painted.
The spectrum of colors is varied.
Mounted on special systems, combs, clamps and screws.
This material is rarely used for housing, mainly for the installation of the ceiling. More often they are used to decorate public premises and common areas.
The basis of the parts is a fiberboard sheet.
It is elastic and bends well. Such a panel with dimensions of 1220x2200x6 mm immediately overlaps a large area. Finishing takes a short time. Impregnation with a mixture of natural resins makes the material water-repellent. The surface of the fiberboard is covered with a thin layer of polymer plastic.
The range of colors is wide. During production, a pattern of ceramic tiles, natural stone, brick or wood texture is immediately pressed.
A sheet panel is glued to the wall surface using PVA, adhesive composition for floor coverings, glue putty.
Such panels are used in wet rooms, kitchens, dining rooms, pantries. Temperature drops do not affect the sheets.
For additional fastening there are a spike and a groove at the edges.
Paneling of internal surfaces has a wide range of advantages over plastering and coating with paints and varnishes.
Posted By: Work Style |02, Nov 2020
Posted By: Work Style |12, Nov 2020
Posted By: Work Style |02, Nov 2020
Posted By: Work Style |04, Nov 2020
Posted By: Work Style |05, Nov 2020