Many people strive to design rooms in their homes and sometimes it is very unusual. In order to decorate the walls and ceiling, various materials are used, but we will talk about decorative plaster, or rather, about applying a pattern to plaster.
The pattern is applied to the plaster using decorative plaster rollers.
It is very interesting that a simple and well-known tool like a roller has become a tool for decorating walls.
How is the effect obtained?
When decorating facades , as well as for interior work in order to put on plaster remained a beautiful pattern using a roller with a convex pattern. Such a pattern can imitate various textures, for example, wood, stone, leather, etc.
Until recently, various improvised means were used to create a textured pattern, for example, sponges, hard brushes or combs.
In modern building stores for decorative plastering the choice of embossed rollers is very large and you can freely buy a roller for decoration. Using a roller, unusual three-dimensional images are created on the walls.
There are several coatings for the roller cylinder :
Before choosing a textured roller, you need to determine which specific pattern on the wall you want to make ...
A roller made of soft material, such as fur, creates a "fur coat" effect, foam roller - "bark beetle" effect .
Also, decorative plaster can be used to decorate a wall for brickwork.
If you want to make a marble pattern, then you need to use a roller, which will be wrapped in a compressed cloth, and if you wrap the roller with compressed leather, a pattern resembling a natural stone will come out.
Ordinary foam rollers can be improved by winding threads, twine or pieces of foam rubber in order to make unusual patterns on the walls or create different structures, for example, tree bark.
If you need a pronounced decor, then use rollers with a hard surface.
These rollers are slightly more expensive as they have different textures and can be used several times.
Rollers with a rubber surface are most appreciated, because they have a convex or slotted pattern.
With a structured roller, work is done in two ways :
The second method is used in order to make a colored, patterned painting with a rubber roller.
The decor consists of two stages:
It is best to work in pairs: one will apply the plaster, and the other will create relief.
After the plaster is completely dry, it will be possible to paint the surface with a suitable paint.
In the event that it is necessary to paint the entire wall, then it is necessary to use a roller with a long nap, and if it is necessary to paint the protruding parts, then a roller with a short nap is used.
To use rollers for plaster, you need to know a few rules :
The "fur coat" pattern in the modern version is created using a relief roller, which makes the layer aesthetic and uniform.
It is possible to decorate surfaces with the "fur coat" pattern both the outer walls of the building and the inner walls.
First, a putty is applied to the surface, and then a roller wrapped in fur is carried over the plastered surface.
If you make a mistake and see that the plastering is uneven, then remove the excess with a spatula.
In the creation of the "fur coat" pattern, no breaks should be taken, otherwise the plaster will dry out and the joint will be too visible at the edges.
In this article, we talked about what a relief roller is and how to use it. We hope you find this article useful.
We wish you good luck in your endeavors!
Posted By: Work Style |11, Nov 2020
Posted By: Work Style |05, Nov 2020
Posted By: Work Style |10, Nov 2020
Posted By: Work Style |03, Nov 2020
Posted By: Work Style |06, Nov 2020